Telephone Features 3-25
3.2 Telephone Features C
Conditions
• The Caller ID Indication button indicator may turn on when a call is received.
• Even if you answer a call, the call information can be recorded by pressing the Caller
ID Indication button during the conversation.
• You can modify and call back the logged numbers. Refer to the “Call Log, Incoming”
feature.
• A caller’s name will be displayed if the corresponding speed dial number has been
assigned a name by System Programming.
• System Programming determines which is displayed first, the name or number.
• You can program by System Programming whether or not to print out a Caller ID
number on the SMDR.
• You can also program by System Programming whether or not to print out a Caller ID
number on the SMDR before the call is answered.
• If “OUT OF AREA” is displayed, the call may be from out of the calling area.
• If “LONG DISTANCE” is displayed, it may be a long distance call.
• If “PRIVATE” is displayed, the caller’s name and number was not sent by request of
the caller.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Caller ID Indication Button,
Caller ID Selection Button
• System Programming — Installation Manual
[900] Caller ID Assignment
[904] Caller ID Log Priority Selection
[906] Caller ID SMDR Format
[907] Caller ID SMDR Printout Selection
Feature References
Call Log, Incoming
Call Log Lock, Incoming in the Personal Area
Call Log Lock, Incoming in the Common Area (3.3 Operator/Manager Service Features)
To Next Page
Loading...
