Panasonic KX-TAW848 - Page 262

4.6 Help
262 Feature Guide
A • The number entered in Location No. on the Configuration—Extension Port screen
(see "4.7.11 Extension Port [1-5]") is the same as that entered for another DSS Console.
Change this so that the numbers do not overlap.
Q
I have set the type of an extension port to "VM (DPT)", but I cannot apply this
setting. (Error E000403)
A • The VM Unit No. and Port No. settings entered on the Configuration—Extension Port
screen (see "4.7.11 Extension Port [1-5]") are the same as those entered for another VM
(DPT). Change this so that the numbers do not overlap.
Q
What programming do I have to perform to use a headset with an extension?
A • Set Headset OFF/ON on the Configuration—Extension Port screen (see "4.7.11
Extension Port [1-5]") to "Headset ON".
Q
Modified settings are not saved even when I press the Apply button.
A • To save the system data files, choose Save from the File menu.
Q
How do I change the extension numbering plan from 3-digit numbers to 4-digit
numbers?
A • From the System—Numbering Plan—Extension screen (see "4.8.10 Numbering
Plan—Extension [2-6-1]"), enter a 2-digit number in Leading Number, or change
Additional Digits from "x" to "xx".
For more details, see What is the procedure to modify the Numbering Plan?.
Q
How do I set a 3-digit numbering plan?
A • There are 2 methods of creating a 3-digit numbering plan, using the System—
Numbering Plan—Extension screen (see "4.8.10 Numbering Plan—Extension [2-6-
1]"):
1. Set the leading number to be 2 digits, with one additional digit. This method allows
a maximum of 10 extensions.
Example: Leading Number = 10; Additional Digits = x
In this example, extension numbers 100 to 109 can be used.
2. Set the leading number to be one digit, with 2 additional digits. This method allows
a maximum of 100 extensions.
Example: Leading Number = 1; Additional Digits = xx
In this example, extension numbers 100 to 199 can be used.
For more details, see What is the procedure to modify the Numbering Plan?.
Q
What is the procedure to modify the Numbering Plan?