5. The main window is displayed.
6. Click Connect ® USB from the menu bar, or click Connect on the toolbar, select USB in the Connection
Mode dialog box and click Next.
Note
• To connect to the VPS via USB, the KX-TVA USB driver must be installed on the PC, as explained
in 1.2 KX-TVA Maintenance Console Installation.
7. Enter the installer level password (default: 1234), then click Next.
Note
• The installer level password (also called the administrator password) is required to access the VPS
for programming. The System Administrator can change the password (see "Password" in
2.8.1 Administrator).
8. Click Finish when the message Connected! is displayed.
12 Programming Manual Document Version 3.0 2010/06
1.3 Starting KX-TVA Maintenance Console
To Next Page
Loading...
