Panasonic KX-TVA50 - Efa Transfer Sequence; Efa Transfer Reconnect Sequence on Busy

Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
Feature Manual References
2.2.7 Call Transfer to Outside
EFA Transfer Sequence
Specifies the sequence the VPS uses to transfer calls to trunks (CO lines) using EFA (External Feature
Access). This setting should match the settings of the PBX.
Default
F
60TN
Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
EFA Transfer Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) is busy. This setting should match the settings of the PBX.
Default
F
60TN
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
178 Programming Manual Document Version 3.0 2010/06
2.5.4 Parameters