Panasonic KX-TVA50 - Remote Call FWD To CO

2.1.9 Remote Call FWD To CO
Specifies the telephone numbers of destinations to which callers are forwarded when the subscriber sets
Remote Call Forwarding. 2 telephone numbers can be specified per mailbox.
Note
• Class of Service programming determines if the subscriber is able to use this feature.
• This feature is only available when the VPS is connected to a Panasonic KX-T series PBX using DPT
Integration.
Telephone Number 1, Telephone Number 2
Specifies the telephone numbers of destinations to which callers are forwarded when the subscriber sets
Remote Call Forwarding. Telephone numbers can contain the digits "0–9" and "
". These telephone numbers
should begin with a trunk (CO line) access number.
Default
None
Value Range
Max. 24 digits (With the KX-TD500 and KX-TDE/KX-TDA/KX-TAW series)
Max. 16 digits (With other KX-T series PBXs)
Programming Manual References
"Remote Call Forward to CO" in 2.2.2 Personal Options
Document Version 3.0 2010/06 Programming Manual 71
2.1.9 Remote Call FWD To CO