Panasonic KX-TVA50 - Minimum Message Length; Delay after Dialing before On-Hook; Dtmf Cut Length

Delay After Dialing Before On-hook
Specifies the length of time that the VPS waits for an answer when making an outside call. If no answer is
detected, the VPS disconnects the call.
Default
60 s
Value Range
0 s–250 s
DTMF Cut Length
Specifies the length of time for DTMF to be deleted when it is detected while recording.
Default
110 ms
Value Range
0 ms–500 ms
Minimum Message Length
Specifies the minimum message recording length. Messages shorter than the specified minimum recording
length are discarded from the mailbox.
Default
2 s
Value Range
0 s–9 s
Call Progress Tone Detection for Inband Mode
This setting determines whether the VPS detects Call Progress Tones during Inband Integration. If set to
"Enable", Call Progress Tones are detected in addition to DTMF signals.
Default
Enable
Value Range
Disable, Enable
Document Version 3.0 2010/06 Programming Manual 191
2.6 Hardware (H/W) Settings