Panasonic KX-TVA50 - Operator Transfer Sequence; Extension Transfer Sequence

Value Range
2–5 digits
Feature Manual References
2.4.1 Auto Configuration (APT/DPT Integration Only)
Operator Transfer Sequence
Specifies the sequence for transferring calls to an operator’s extension.
Default
FX
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialing
0–9, , #: Dial Code
Extension Transfer Sequence
Specifies the sequence for transferring calls to any extension except an operator’s extension.
Default
FX
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialing
0–9, , #: Dial Code
Alternate Extension Transfer Sequence
Specifies the sequence for transferring calls to extensions in the Alternate Extension Group.
Default
FX
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
Document Version 3.0 2010/06 Programming Manual 153
2.5.4 Parameters