2.5.4.5 PBX Parameters
Specifies the parameters used to program the VPS for optimal signaling and performance with the PBX.
PBX Environment
Specifies how the VPS will initiate and control call transfers, setup outgoing calls, and control message waiting
lamps on extensions. For KX-TVA50, the procedure for verifying the correct code sequences for non-Panasonic
KX-T series PBX is to manually execute the sequences from a single line telephone (SLT) with the PBX.
PBX Type
Specifies the type of PBX connected to the VPS.
Default
KX-TDA/TAW/TDE
Document Version 3.0 2010/06 Programming Manual 151
2.5.4 Parameters
To Next Page
Loading...
