Forward to VM Ringing
Specifies the DTMF signal used to indicate a Forward to VM Ring tone. Sent to the VPS when the dialed
extension has set calls to be forwarded to the VPS and a VPS port is available to handle the call.
Default
6
Value Range
Max. 16 digits consisting of 0–9,
, #, and A–D
Forward to VM Busy
Specifies the DTMF signal used to indicate a Forward to VM Busy tone. Sent to the VPS when the dialed
extension has set calls to be forwarded to the VPS but no VPS ports are available to handle the call.
Default
7
Value Range
Max. 16 digits consisting of 0–9, , #, and A–D
Forward to Other Extension
Specifies the DTMF signal used to indicate a Forward to Other Extension tone. Sent to the VPS when the
dialed extension has set calls to be forwarded to another extension.
Default
8
Value Range
Max. 16 digits consisting of 0–9,
, #, and A–D
Confirmation
Specifies the DTMF signal used to indicate a confirmation tone. Sent to the VPS when the Message Waiting
Lamp was successfully turned on or off.
Default
9
Value Range
Max. 16 digits consisting of 0–9,
, #, and A–D
Disconnect
Specifies the DTMF signal used to indicate a disconnect tone. Sent to the VPS when the other party goes
on-hook.
Default
#9
Document Version 3.0 2010/06 Programming Manual 159
2.5.4 Parameters
To Next Page
Loading...
