101
5. 4K Photo and Drive Settings
Recording 4K Photos
Applicable modes:
The camera allows you to take burst pictures of 8 million pixels (approx.) at 30 frames/
second. After taking these pictures, you can save the desired moment extracted from their
burst file.
• Use a UHS Speed Class 3 card.
1
Press [ ] (4).
2
Press 2/1 to select a 4K photo icon ([ ],
etc,), and then press 3.
• By default, you can also perform the same operations
as steps
1 and 2 by pressing [Fn1].
3
Select the recording method with 2/1, and
then press [MENU/SET].
• You can also set the recording method in [4K PHOTO]
in the [Rec] menu.
¢ Audio is not played back when you perform playback with the camera.
4
Record a 4K photo.
• If you are using Auto Focus, [Continuous AF] will work during recording. Focus will be
adjusted continuously.
[4K Burst]
For capturing the best shot of a fast-moving subject
(e.g., sports, aeroplanes, trains)
Audio recording: Not available
[4K Burst(S/S)]
“S/S” is an
abbreviation of
Start/Stop.
For capturing unpredictable photo opportunities
(e.g., plants, animals, children)
Audio recording: Available
¢
[4K Pre-Burst]
For recording as needed whenever a photo opportunity
arises
(e.g., the moment when a ball is thrown)
Audio recording: Not available
To Next Page
Loading...
