EasyManua.ls Logo

Panasonic LUMIX DC-LX100M2

Panasonic LUMIX DC-LX100M2
309 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
231
11. Using the Wi-Fi/Bluetooth function
You can connect the camera to a smartphone via a Bluetooth connection.
Supported smartphones
Connecting for the first time
Pairing needs to be set up only for the first connection. After pairing is set up, a Wi-Fi
connection will be made automatically.
(On the camera)
The camera enters pairing standby mode and displays its device
name.
(On your smartphone)
1 Start Image App.
If a message is displayed indicating that the smartphone is
searching for cameras, close the message.
2 Select [Bluetooth].
3 Turn on the Bluetooth.
4 Select the device name displayed on the camera’s screen from the [Camera
enable to be registered] list.
Bluetooth connection between the camera and the smartphone will be made.
(For Android devices) A Wi-Fi connection will be made by selecting [Connection].
5 Turn on the Wi-Fi function in the smartphone’s setting
menu.
6 On the Wi-Fi setting screen, select the SSID displayed on
the camera. (the device name selected in step
4)
If the SSID is not displayed, it may be displayed after the Wi-Fi
function is turned off and on.
When you need to change the connected device, follow the
on-screen message to change the setting.
Connecting the camera to a smartphone compatible with Bluetooth low
energy
Android: Android 5.0 or higher equipped with Bluetooth 4.0 or higher (excluding
those that do not support Bluetooth low energy)
iOS: iOS 9.0 or higher (excluding the iPad 2)
> [Setup] > [Bluetooth] > [Bluetooth] >
[SET] > [Pairing]
If you are using an Android device, follow the steps up to here to complete the setup.
Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).
If [Wi-Fi Password] (P269) is set to [OFF] on the camera, select [Wi-Fi Setup]. (At the time
of purchase, [Wi-Fi Password] is set to [OFF])
If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile.
1 Install the profile.
If a pass code is set on the smartphone, you need to enter it.
2 Press the home button to close the browser.
MENU
Wi-Fi
0123456789ABC

Table of Contents

Other manuals for Panasonic LUMIX DC-LX100M2

Related product manuals