217
10. Using Menu Functions
You can save pictures of a 4K burst file that were extracted from any 5 second period at
once.
1 Press 2/1 to select the 4K photo burst files and press [MENU/SET].
• If the burst time is 5 seconds or less, all frames will be saved as pictures.
2 Select the first frame of the pictures to be saved at once. (P107, 108)
• Pictures will be saved as a group of Burst Mode pictures in JPEG format. (P217)
• The effects applied through the RAW processing on the camera and those applied through the
RAW processing on the software “SILKYPIX Developer Studio” are not completely identical.
• The [White Balance] setting of pictures taken with multiple exposures is fixed to the setting at
the time of recording.
• Edit group images one by one. The edited images will be saved as new images separate from
the original group images.
Not available in these cases:
• [RAW Processing] is not available when an HDMI micro cable is connected.
• RAW processing cannot be performed on RAW images recorded with other devices.
[4K PHOTO Bulk Saving]
> [Playback] > [4K PHOTO Bulk Saving]
MENU
To Next Page
Loading...
Need help?
General
