11. Using the Wi-Fi/Bluetooth function
266
Connecting the camera and another device directly ([Direct])
[WPS Connection]
[WPS (Push-Button)]
1 On the camera, select [WPS (Push-Button)].
2 Set the device to WPS mode.
• You can wait longer for a connection by pressing [DISP.] on this
camera.
[WPS (PIN code)]
1 On the camera, select [WPS (PIN code)].
2 Enter the PIN code of the device into this camera.
[Manual Connection]
Enter the SSID and password
displayed on the camera.
• If the destination is set to
[Smartphone], the password is not
displayed. Select the SSID to
establish a connection. (P233)
• Please also refer to the operating instructions of the device to be connected.
To Next Page
Loading...
