EasyManua.ls Logo

Panasonic LUMIX DC-LX100M2

Panasonic LUMIX DC-LX100M2
309 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
179
10. Using Menu Functions
Applicable modes:
You can set the upper limit of ISO sensitivity when ISO sensitivity is set to [AUTO] or [ ].
Settings: [AUTO]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[25600]
Applicable modes:
Set the minimum shutter speed when the ISO sensitivity is set to [AUTO] or [ ].
Settings: [AUTO]/[1/16000] to [1/1]
Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night or similar scenery.
Settings: [ON]/[OFF]
[ISO Auto Upper Limit (Photo)]
> [Rec] > [ISO Auto Upper Limit (Photo)]
[Min. Shtr Speed]
> [Rec] > [Min. Shtr Speed]
The shutter speed may become slower than the set value in situations where proper exposure
cannot be obtained.
Not available in these cases:
The desired compensation effect may not be achieved depending on the recording conditions.
[Min. Shtr Speed] cannot be set in the following case:
When using [Panorama Shot]
[Long Shtr NR]
> [Rec] > [Long Shtr NR]
[Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for
signal processing.
Not available in these cases:
This function is not available in the following cases:
When recording motion pictures
When recording 4K photos
When recording with the Post Focus function
When using [Panorama Shot]
When using the electronic shutter
MENU
MENU
MENU

Table of Contents

Other manuals for Panasonic LUMIX DC-LX100M2

Related product manuals