45
2. Getting Started/Basic Operations
Applicable modes:
You can easily optimise the brightness for a touched position. When the face of the subject
appears dark, you can brighten the screen according to the brightness of the face.
∫ Cancelling the Touch AE function
Touch [ ].
Touch AE
1 Touch [ ].
2 Touch [ ].
• The setting screen for the brightness optimisation position
is displayed.
• [Metering Mode] is set to [ ], which is used exclusively
for the Touch AE.
3 Touch the subject you want to optimise the
brightness for.
• Touch [Reset] to bring the brightness optimisation position
back to the centre.
4 Touch [Set].
Not available in these cases:
• This function is not available in the following cases:
– When using the Digital Zoom
– When [Touch AF] in [Touch Settings] of the [Custom] ([Operation]) menu has been set to
[AF+AE]
AE
AE
To Next Page
Loading...
