98
5. 4K Photo and Drive Settings
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
Press [ ] (4).
2
Press 2/1 to select the drive mode, and
then press [MENU/SET].
• Select [ ] to return to [Single] (default setting).
1 [Single]
When the shutter button is pressed, only one picture is
recorded.
2 [Burst] (P99)
Recordings are made in succession while the shutter
button is pressed.
3 [4K PHOTO] (P101)
When the shutter button is pressed, a 4K photo is
recorded.
4 [Post Focus] (P111)
When the shutter button is pressed, Post Focus
recording is performed.
5 [Self Timer] (P116)
When the shutter button is pressed, recording takes
place after the set time has elapsed.
6 [Panorama Shot] (P118)
The pictures are recorded in succession while you
press the shutter button and move the camera
horizontally or vertically, and then the camera combines
the pictures into a single panorama picture.
To Next Page
Loading...
