11. Using the Wi-Fi/Bluetooth function
236
∫ When connecting via a wireless access point ([Via Network]):
(On the camera)
1 Select [Via Network].
• Follow the connection procedure described on P264 to connect the camera to a wireless
access point.
(On your smartphone)
2 Turn on the Wi-Fi function in the smartphone’s setting menu.
3 Connect the smartphone to the wireless access point to which the camera is
connected.
4 Start “Image App ”.
∫ When directly connecting the camera and smartphone ([Direct]):
(On the camera)
1 Select [Direct].
• Follow the connection procedure described on P266 to connect the camera to the
smartphone.
(On your smartphone)
2 Start “Image App ”.
1 Set the camera to Recording Mode.
• Press the shutter button halfway to return to recording mode.
2 Select the camera’s menu items to terminate the
Wi-Fi connection.
• You can also terminate the connection by pressing [Wi-Fi]
on the camera.
3 On the smartphone, close “Image App”.
Terminating the Wi-Fi connection
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function]
>
[Yes]
• When recording with [4K Pre-Burst] with the smartphone, terminate the connection only after
switching to 4K Burst recording by pressing [ ] on the camera.
MENU
To Next Page
Loading...
