5. 4K Photo and Drive Settings
106
Selecting pictures from 4K burst file and saving
1
Select an image with the [ ] icon on the playback
screen, and press 3.
• You can also perform the same operation by touching the icon [ ].
• If the image was recorded with [4K Pre-Burst], proceed to step
3.
3
Drag the frames to select the frame you want
to save as a picture.
• You can also perform the same operation by pressing
2/1.
4
Touch [ ] to save the picture.
• The picture will be saved in JPEG format.
2
Drag the slide bar to make a rough selection
of scenes.
• For information on how to use the slide view screen, refer
to P107.
• You can select its scenes on the 4K burst playback
screen by touching [ ] (Fn1). (P108)
Slide view screen
If you use [4K PHOTO Bulk Saving] in the [Playback] menu, you can bulk save
5 seconds’worth of 4K recording. (P217)
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
• 4K burst files saved on a PC will be treated as MP4 motion pictures.
Fn1 Fn2
AUTO
MODE
To Next Page
Loading...
