121
5. 4K Photo and Drive Settings
∫ About playback
Pressing 3 will start scrolling playback automatically in the
same direction as the recording.
• The following operations can be performed during scrolling
playback.
¢ While paused, you can drag the screen to scroll forwards or backwards. If you touch the
scroll bar, the playback position jumps to the touched position.
∫ To cancel the panorama function
Select [ ] ([Single]) or [ ] from the drive mode (P98).
3 Start panorama playback/Pause
¢
4 Stop
• The zoom position is fixed to Wide.
• The shutter type is fixed to the electronic shutter.
• The camera automatically sets the aperture value and shutter speed during panorama
recording. The settings of the aperture ring and shutter speed dial are disabled.
• The focus, White Balance, and exposure are fixed at the optimum values for the first picture.
As a result, if the focus or brightness changes substantially during recording, the entire
panorama picture may not have the suitable focus or brightness.
• When multiple pictures are combined to create a single panorama picture, the subject may
appear distorted or the connection points may be noticeable in some cases.
Not available in these cases:
• Panorama recording is disabled in the following cases:
– When using [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation]
• A panorama picture may not be able to be created, or the pictures may not be combined
properly when recording the following subjects or under the recording conditions below.
– Subjects with a single, uniform colour or repetitive pattern (such as the sky or a beach)
– Moving subjects (person, pet, car, waves, flowers blowing in the breeze, etc.)
– Subjects where the colour or patterns change in a short time (such as an image appearing
on a display)
– Dark places
– Locations with flickering light sources such as fluorescent lights or candles
To Next Page
Loading...
Need help?
General
