131
6. Recording Images that Suit Your Subjects and Purposes
3
Focus on the subject and take a picture.
• When Exposure Bracket is selected, the bracket display flashes until all of the pictures
you have set are taken. If you change the bracket settings or turn off the camera before
all of the pictures you have set are taken, the camera restarts recording from the first
picture.
∫ To cancel [Bracket Type]
Select [OFF] in step
1.
• The following changes occur when Aspect Bracket is set:
– When [Picture Size] is set to [S], the setting is automatically changed to [M].
– The same shutter speed, aperture value, focus, [Sensitivity], [Exposure Comp.] and [White
Balance] settings are used for all four pictures.
Not available in these cases:
• Bracket recording is disabled in the following cases.
– When using [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star
Filter]/[Sunshine] in [Filter Settings]
– When recording motion pictures
– When recording 4K photos
– When recording with the Post Focus function
– When using [Panorama Shot]
– When using [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto Shooting] is set)
– When recording with the flash (except for when using White Balance Bracket or Aspect
Bracket)
• White Balance Bracket is disabled in the following cases:
– Intelligent Auto Plus Mode
– When using [Filter Settings]
– When recording in Burst Mode
– When [Quality] is set to [ ], [ ] or [ ]
• Aspect Bracket is disabled in the following cases:
– When [Toy Effect]/[Toy Pop] in [Filter Settings] is used
– When recording in Burst Mode
– When [Quality] is set to [ ], [ ] or [ ]
To Next Page
Loading...
Need help?
General
