157
8. Recording Motion Pictures
Applicable modes:
When you operate the zoom, buttons, etc. while recording motion pictures, the sounds
associated with such operations may be recorded. Using touch operations allows silent
operation.
Recording motion pictures with reduced operational sounds
1 Touch [ ] while recording a motion picture.
2 Touch the desired icon.
: Zoom
: Exposure compensation
¢
: ISO sensitivity
: Sound recording level adjustment
¢ It is displayed when [Exposure Comp.] is set in a function button. (P50)
3 Drag the slide bar to adjust the
setting.
[ ]/[ ]: Adjusts the setting slowly
[ ]/[ ]: Adjusts the setting quickly
• When the ambient temperature is high or a motion picture is recorded continuously, the
camera may display [ ] and then stop the recording. Wait until the camera cools down.
• When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording.
When [Rec Area] in the [Custom] menu ([Monitor / Display]) is set to [ ], angle of view
during motion picture recording is displayed.
• If the Extra Optical Zoom are used before pressing the motion picture button, those settings
will be cleared, so the angle of view will change dramatically.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• The zoom speed decreases during the recording of a motion picture.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
Not available in these cases:
• Motion pictures cannot be recorded in the following cases.
– When using [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine]
in [Filter Settings]
– When recording with the Post Focus function
– When using [Panorama Shot]
– When taking pictures with [Time Lapse Shot]
– When using [Stop Motion Animation]
ISO
To Next Page
Loading...
Need help?
General
