193
10. Using Menu Functions
In-focus portions (portions on the screen with clear outlines) are highlighted when focus is
being adjusted manually.
• When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing
you to achieve a more precise focus.
• Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
Display the histogram.
You can set the position by pressing 3/4/2/1.
• Direct touch operation is also possible from the recording screen.
• A histogram is a graph that displays brightness along the horizontal axis (black
to white) and the number of pixels at each brightness level on the vertical axis.
It allows you to easily check a picture’s exposure.
A dark
B bright
[Peaking]
[Detect Level] [HIGH] [LOW]
[Display Color]
[ ] (Light blue) [ ] (Blue)
[ ] (Yellow) [ ] (Orange)
[ ] (Yellow-green) [ ] (Green)
[ ] (Pink) [ ] (Red)
[ ] (White) [ ] (Grey)
• Each time [ ] in [ ] is touched, the setting is switched in order of [ ] ([Detect Level]:
[LOW]) > [ ] ([Detect Level]: [HIGH]) > [OFF].
• [Peaking] is not available when using [Live View Boost]
• [Peaking] does not work with [Rough Monochrome] in [Filter Settings].
[Histogram]
• When the recorded picture and the histogram do not match each other under the
following conditions, the histogram is displayed in orange.
– During Exposure Compensation
– When the flash is activated
– When the correct exposure is not achieved, such as when the lighting is low.
• The histogram is an approximation in the Recording Mode.
To Next Page
Loading...
Need help?
General
