11. Using the Wi-Fi/Bluetooth function
244
• When [Auto Transfer] is set to [ON], [Wi-Fi Function] in [Wi-Fi] in the [Setup] menu
cannot be used.
• If the camera turns off during image transfer and the file transfer is cancelled, it will resend the
files as soon as it is turned on again.
– You may not be able to resend the files that did not get delivered if there is a change in their
storage status. For example, if you replace the card before turning on the camera again, the
files may not be resent.
– If the number of files that did not get delivered is large, it may not be possible to resend all of
the files.
• An OS version of Android 7.0 or higher or iOS 10.0 or higher is required to save pictures in
RAW format.
• Depending on the smartphone or its OS version, pictures in RAW format may not be displayed
correctly.
• You cannot automatically transfer the following types of images:
– Motion pictures
– 4K burst files
– Images recorded with the Post Focus function
To Next Page
Loading...
Need help?
General
