13. Others
294
• Decrease the ISO sensitivity. (P93)
• Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the
items other than [Noise Reduction]. (P175)
• Set the [Long Shtr NR] to [ON]. (P179)
• During recording with the electronic shutter, motion picture recording and 4K photo recording, if
you take a picture of a moving subject, it may appear distorted on the picture.
This is characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not
a malfunction.
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and colour. These are a result of the characteristics
of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colours and screen brightness may
change or horizontal striping may appear on the screen.
The recorded picture looks rough.
Noise appears on the picture.
The subject appears distorted on the picture.
The brightness or the hue of the recorded picture is different from the actual
scene.
To Next Page
Loading...
Need help?
General
