4. Focus, Brightness (Exposure) and Colour tone Settings
74
• In Intelligent Auto Mode, the camera performs the same operation as [AF] even if you set the
focus selector switch to [AF#] (AF Macro).
• If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case,
re-adjust the focus.
• When the lighting is low making it difficult to focus with Auto Focus, set [Monitor Display
Speed] or [LVF Display Speed] to [60fps].
Subjects and recording conditions which are difficult to focus
• Fast-moving subjects, extremely bright subjects or subjects without contrast.
• When recording subjects through windows or near shiny objects.
• When it is dark or when jitter occurs.
• When the camera is too close to the subject or when taking a picture of both distant and near
subjects.
How to adjust the composition while pressing the shutter button halfway
When recording with [Ø], follow the steps below if the subject is not in the centre of the
composition of the picture you want to take. (When [AFS/AFF/AFC] is set to [AFS])
1 Aim the AF area over the subject.
2 Press the shutter button halfway.
• This will lock the focus and exposure.
3 While continuing to press and hold the shutter button halfway, move the camera to
compose the picture you want to take.
4 Press the shutter button to take the picture.
To Next Page
Loading...
Need help?
General
