226
SQW0038
Wi-Fi
Wi-Fi
®
Function and NFC Function
• Pressing the [Wi-Fi] button during a Wi-Fi connection enables the following operation.
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
*
1
Terminates the Wi-Fi connection, and allows you to
select a different Wi-Fi connection.
[Change Settings for Sending
Images]
*
2
For details (→271).
[Register the Current Destination to
Favorite]
*
1
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
[Network Address]
Displays the MAC address and IP address of this unit
(→273).
*
1
This item will not be displayed if you press to send pictures to WEB services while the
pictures are displayed (→254).
*
2
This item will not be displayed if the destination for [Remote Shooting & View], [Playback on
TV] or [Send Images Stored in the Camera] is set to [Printer].
●
Do not remove the memory card or battery or move to an area without any reception while
sending images.
●
The camera cannot be used to connect to a public wireless LAN connection.
●
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
●
We recommend that you use a fully charged battery when you send pictures.
●
When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted. (A message such as [Communication error] is displayed.)
●
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
●
Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
●
The monitor display may become distorted for an instant while connected to the service, however
this will not affect the image being sent.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
