254
SQW0038
Wi-Fi
Using WEB services
■
Quickly sending pictures in the camera to WEB services
Once you send a picture, you can send pictures to the WEB service as quickly and
easily as using a smartphone, only when the environment for connecting to a wireless
access point is available.
Display the picture
Use to select [Yes] after pressing
(When a group picture is being displayed, select
[Upload(Wi-Fi)] → [Yes])
• The camera is connected to the previously used wireless access
point and the pictures are sent to the WEB service.
*
1,
*
2
Upload this image by Wi-Fi?Upload this image by Wi-Fi?
YesYes
NoNo
*
1
When no connection history is available for the wireless access point, proceed to the connection
method selection screen. Select the connection method and connect the camera to a wireless
access point. (→264)
*
2
If you do not have a “LUMIX CLUB” login ID, proceed to the new login ID sign up screen. Get a
login ID and set a password. (→259)
Performing the operation for the first time
After you select [Yes] in step above, the WEB service selection screen appears.
Use to select WEB services and press [MENU/SET]
Check the setting on the confirmation screen for the transmission setting and press
[MENU/SET]
• The picture is sent to the WEB service.
• To change the transmission setting for the picture, press the [DISP.] button. (→271)
• After the second time, the pictures are sent using the same WEB service and the same
picture transmission settings as before.
●
When pictures are displayed as a group, they are all sent. When a single picture in a group is
displayed, only the picture being displayed is sent.
●
To change the transmission settings of a picture or to close the Wi-Fi connection, press the [Wi-Fi]
button. You can also close the connection by pressing the Playback button or [MENU/SET] and
selecting [Yes]. When you switch to Recording Mode, the Wi-Fi connection is closed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
