Panasonic MINAS-A5B Series - Page 123

No. SX-DSV02472 -117-
(2) Warning types
 General warning
Warning
No.
(Hex.)
Warning Content
Output setting
Waning mask
Pr 4.40/
Pr 4.41
*1)
Pr 6.38
Corresponding
bit
*2)
A0
Overload protection
Load factor is 85% or more the protection level.
1
bit 7
A1
Over-regeneration
warning
Regenerative load factor is 85% or more the
protection level.
2 bit 5
A2
Battery warning
Battery voltage is 3.2 V or lower.
3
bit 0
A3
Fan warning
Fan has stopped for 1 sec.
4
bit 6
A4
Encoder
communication
warning
The number of successive encoder
communication errors exceeds the specified
value.
5 bit 4
A5
Encoder overheat
warning *3)
The encoder detects overheat warning.
6 bit 3
A6
Oscillation
detection warning
If Pr6.37 (oscillation detection level) is
non-zero, it is detected that the torque
oscillation (oscillation state) than that specified
in Pr6.37.
7 bit 13
A7
Lifetime detection
warning
Life expectancy of capacitor or fan becomes
short.
8 bit 2
A8
External scale error
warning
(Not supported)
The external scale detects the warning.
9 bit 8
A9
External scale
communication
warning
(Not supported)
The number of successive external scale
communication errors exceeds the specified
value.
10 bit 14
 Extended warning
Warning
No.
(Hex.)
Warning Content
Output
setting
Waning mask
Pr 4.40/
Pr 4.41
*1)
Pr 6.38
Corresponding
bit
*2)
C3
Main power off
warning
When setting of Pr7.14 (Main power off
warning detection time) is 10-1999,
instantaneous power interruption occurs
between L1 and L3 and lasts for a time longer
than the setting of Pr7.14.
14 bit 12
R1.05
Motor Business Division, Appliances Company, Panasonic Corporation