Chapter 5 Maintenance — Troubleshooting
ENGLISH - 165
Problems Points to be checked Page
The DIGITAL LINK input
image is not displayed.
f Are the connections between the twisted-pair-cable transmitter and the projector or
an external device correctly done?
―
f Is [DIGITAL LINK MODE] set to [AUTO] or [DIGITAL LINK]? Is it set to
[ETHERNET]?
134
f Is a signal which is not compatible with a twisted-pair-cable transmitter being input? ―
3D function is not working.
f Is the [3D INPUT FORMAT] setting of [3D SETTINGS] correct? 91
f Check the 3D eyewear settings. ―
f Is a signal which is supported by the projector being input? 180
Left and right images are
reversed (not showing
properly).
f Are the devices synchronized? Check the 3D eyewear settings. ―
f Change the [LEFT/RIGHT SWAP] setting of [3D SETTINGS]. 92
Image in the 3D eyewear
ickers.
f Are you within the reception range? ―
3D eyewear is not
functioning.
f Are batteries of the 3D eyewear drained? If you use the rechargeable 3D eyewear,
charge it. If you use the battery-powered 3D eyewear, replace the battery.
―
f Is the [3D SETTINGS] setting correct? 90
Attention
f If problems persist even after checking the preceding points, consult your dealer.
To Next Page
Loading...
