Chapter 4 Settings — [PICTURE] menu
72 - ENGLISH
2) Press qw or the <ENTER> button.
f The [BRIGHTNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Increases the brightness of the dark (black) parts of the screen.
-
31 - +31
Press the q button.
Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
You can adjust the color saturation of the projected image.
1) Press as to select [COLOR].
2) Press qw or the <ENTER> button.
f The [COLOR] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Deepens colors.
-
31 - +31
Press the q button.
Weakens colors.
[TINT]
You can adjust the skin tone in the projected image.
1) Press as to select [TINT].
2) Press qw or the <ENTER> button.
f The [TINT] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Adjusts skin tone toward greenish color.
-
31 - +31
Press the q button.
Adjusts skin tone toward reddish purple.
[COLOR TEMPERATURE]
You can switch the color temperature if the white areas of the projected image are bluish or reddish.
Adjusting with color temperature
1) Press as to select [COLOR TEMPERATURE].
2) Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT] Factory default setting.
[USER1]
Adjusts white balance as desired. Refer to “Adjusting desired white balance” (x page 73) for
details.
[USER2]
[3200K] - [9300K] Allows you to set in increments of 100 K. Select so that images become natural.
Note
f When [PICTURE MODE] (x page 71) is set to [DICOM SIM.], [DEFAULT] cannot be selected.
f When [COLOR MATCHING] (x page 95) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is xed to [USER1].
f The color temperature numerical values are guidelines.