Panasonic PT-DZ870E

Chapter 6 Appendix — Technical information
180 - ENGLISH
Mode
Resolution
(Dots)
Scanning freq.
Dot clock
freq.
(MHz)
Format
Plug and play
*1
Horizontal
(kHz)
Vertical
(Hz)
RGB2
DVI-D
HDMI
EDID1 EDID2 EDID3
1920 x 1080
1 920 x 1 080 55.6 49.9 141.5 R/D/H ― ― ― ― ―
1 920 x 1 080
*5
66.6 59.9 138.5 R/D/H ― ― ― ― ―
1 920 x 1 080
*7
67.2 60.0 173.0 R ― ― ― ― ―
WUXGA
1 920 x 1 200 61.8 49.9 158.3 R/D/H ― ― ― ― ―
1 920 x 1 200
*5
74.0 60.0 154.0 R/D/H
l
―
l l
*8
l
*8
1 920 x 1 200
*7
74.6 59.9 193.3 R ― ― ― ― ―
*1 Signals with l in the Plug and play columns are signals described in EDID (extended display identication data) of the projector. A signal, which
has no l in the Plug and play columns but has an entry in the Format column, can be input. For signals without l in the Plug and play columns,
resolution may not be selected in the computer even though the projector supports them.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*4 When [3D INPUT FORMAT] is set to [AUTO], 3D images in frame sequential format are displayed. To display images in 2D, set [3D INPUT
FORMAT] to [NATIVE].
*5 VESA CVT-RB (Reduced Blanking)-compliant
*6 Only for PT-DW830E
*7 Samples the pixels in the image processing circuit and projects the image.
*8 Only for PT-DZ870E
Note
f The display dot for PT-DZ870E is 1 920 x 1 200, the display dot for PT-DW830E is 1 280 x 800, and the display dot for PT-DX100E is
1 024 x 768. A signal with a different resolution is converted to the number of display dots.
f The “i” at the end of the resolution indicates an interlaced signal.
f When interlaced signals are connected, ickering may occur on the projected image.
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
List of 3D compatible signals
The following table species the 3D compatible video signals that the projector can project.
f Abbreviations for input formats and 3D formats in the table have the following meanings.
g FP: Frame packing system
g SBS: Side by side system
g TB: Top and bottom system
g LBL: Line by line system
g FS: Frame sequential system
g 3G: 3G-SDI Level B simultaneous system
g H-D: HDMI & DVI-D Input simultaneous system
g R1-2: RGB1 & RGB2 Input simultaneous system
3D compatible
signal
Resolution
(Dots)
Scanning freq.
Dot clock
freq.
(MHz)
HDMI DVI-D
Horizontal
(kHz)
Vertical
(Hz)
FP SBS
*1
TB FS SBS
*1
TB LBL FS
750 (720)/60p 1 280 x 720 45.0 60.0 74.3
l l l
―
l l l
―
750 (720)/50p 1 280 x 720 37.5 50.0 74.3
l l l
―
l l l
―
1080/60i 1 920 x 1 080i 33.8 60.0 74.3
l l
― ―
l l
― ―
1080/50i 1 920 x 1 080i 28.1 50.0 74.3
l l
― ―
l l
― ―
1080/24p 1 920 x 1 080 27.0 24.0 74.3
l l l
―
l l
― ―
1080/24sF 1 920 x 1 080i 27.0 48.0 74.3 ― ― ― ―
l l
― ―
1080/25p 1 920 x 1 080 28.1 25.0 74.3 ― ― ― ―
l l
― ―
1080/30p 1 920 x 1 080 33.8 30.0 74.3 ― ― ― ―
l l
― ―
1080/60p 1 920 x 1 080 67.5 60.0 148.5 ―
l l
―
l l
― ―
1080/50p 1 920 x 1 080 56.3 50.0 148.5 ―
l l
―
l l
― ―
VGA480 640 x 480 31.5 59.9 25.2 ― ― ― ―
l
― ― ―
SVGA 800 x 600 37.9 60.3 40.0 ― ― ― ―
l
― ― ―
XGA
1 024 x 768 39.6 50.0 51.9 ― ― ― ―
l
― ― ―
1 024 x 768 48.4 60.0 65.0 ― ― ― ―
l
― ― ―
1 024 x 768 81.4 100.0 113.3 ― ― ―
l
― ― ―
l
1 024 x 768 98.8 120.0 139.1 ― ― ―
l
― ― ―
l
MXGA 1 152 x 864 53.7 60.0 81.6 ― ― ― ―
l
― ― ―