Panasonic PT-RS30K

INF-10
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
Chapter 4 Settings — Menu navigation
84 - ENGLISH
Sub-menu item Factory default
[BLANKING] ―
[INPUT RESOLUTION] ―
[CLAMP POSITION] [24]
*1
[EDGE BLENDING] [OFF]
[FRAME RESPONSE] [NORMAL]
[FRAME CREATION] ―
[FRAME LOCK] ―
[RASTER POSITION] ―
*1 Depends on the signal input.
[DISPLAY LANGUAGE]
Details (x page 107)
[3D SETTINGS]
Sub-menu item Factory default
[3D SYSTEM SETTING] [SINGLE]
[3D SYNC SETTING] ―
[3D INPUT FORMAT] [AUTO]
*1
[LEFT/RIGHT SWAP] [NORMAL]
[3D COLOR MATCHING] [SHARED 2D/3D]
[3D PICTURE BALANCE] ―
[DARK TIME SETTING] [1.5ms]
[3D FRAME DELAY] [0us]
[3D TEST MODE] [NORMAL]
[3D TEST PATTERN] ―
[SAFETY PRECAUTIONS MESSAGE] [ON]
[3D SAFETY PRECAUTIONS] ―
*1 Varies depending on the selected input terminal.
[DISPLAY OPTION]
Sub-menu item Factory default
[COLOR MATCHING] [OFF]
[LARGE SCREEN CORRECTION] [OFF]
[SCREEN SETTING] ―
[AUTO SIGNAL] [OFF]
[AUTO SETUP] ―
[BACKUP INPUT SETTING] ―
[SIMUL INPUT SETTING] ―
[RGB IN] ―
[DVI-D IN] ―
[HDMI IN] ―
[DIGITAL LINK IN] ―
[SDI IN] ―
[ON-SCREEN DISPLAY] ―
[IMAGE ROTATION] [OFF]
[BACK COLOR] [BLUE]
[STARTUP LOGO] [DEFAULT LOGO]
[UNIFORMITY] ―
[SHUTTER SETTING] ―
[FREEZE] ―
[WAVEFORM MONITOR] [OFF]
[CUT OFF] ―