Panasonic PT-RS30K

INF-11
SECTION 1 SERVICE INFORMATION
<RZ31K/RS30K>
Chapter 4 Settings — Menu navigation
ENGLISH - 85
[PROJECTOR SETUP]
Sub-menu item Factory default
[PROJECTOR ID] [ALL]
[PROJECTION METHOD] ―
[OPERATION SETTING] ―
[LIGHT OUTPUT] [83.3%]
[BRIGHTNESS CONTROL] ―
[STANDBY MODE] [NORMAL]
[NO SIGNAL SHUT-OFF] [DISABLE]
[NO SIGNAL LIGHTS-OUT] [DISABLE]
[INITIAL STARTUP] [LAST MEMORY]
[STARTUP INPUT SELECT] [LAST USED]
[DATE AND TIME] ―
[SCHEDULE] [OFF]
[MULTI PROJECTOR SYNC] ―
[RS-232C] ―
[REMOTE2 MODE] [DEFAULT]
[FUNCTION BUTTON] ―
[LENS CALIBRATION] ―
[LENS MEMORY] ―
[STATUS] ―
[AC VOLTAGE MONITOR] [OFF]
[FILTER SETTING] ―
[SAVE ALL USER DATA] ―
[LOAD ALL USER DATA] ―
[INITIALIZE] ―
[SERVICE PASSWORD] ―
[P IN P]
[TEST PATTERN]
[SIGNAL LIST]
[SECURITY]
Sub-menu item Factory default
[SECURITY PASSWORD] [OFF]
[SECURITY PASSWORD CHANGE] ―
[DISPLAY SETTING] [OFF]
[TEXT CHANGE] ―
[CONTROL DEVICE SETUP] ―
[CONTROL DEVICE PASSWORD CHANGE] ―
[NETWORK]
Sub-menu item Factory default
[DIGITAL LINK MODE] [AUTO]