Panasonic PT-RS30K

DIS-8
SECTION 2 DISASSEMBLY PROCEDURES
<RZ31K/RS30K>
* Before Disassembly the projector, turn off the POWER switch and disconnect the power plug from the wall outlet.
* To assemble, reverse the disassembly procedures.
2. 2. Projection lens removal
2. 3. Top cover (F)/(R) removal
2. 4. Front cover and Rear cover removal
2. 5. Side cover (L)/(R) removal
2. 6. Signal block removal
2. 7. Power PB block removal
2. 8. Frames removal
2. 9. Exhaust fan block removal
2. 10. LD driver block removal
2. 11. Power PF block removal
2. 12. Frame (R) removal
2. 13. PW fan, radiator fan block removal
2. 14. Rod ass'y removal
2. 15. Lighting block 2 removal
2. 16. Liquid cooling unit 2 removal
2. 17. LD unit 2 removal
2. 18. Phosphor wheel 2 removal
2. 19. Lighting block 1 removal
2. 20. Liquid cooling unit 1 removal
2. 21. LD unit 1 removal
2. 22. Phosphor wheel 1 removal
2. 23. DMD block/liquid cooling unit removal
2. 24. Engine exhaust fans, DMD cover bottom removal
2. 25. Mechanical shutter removal
2. 26. Mirror block removal
2. 27. Lens mount block removal
Wiring connection
Completed Product