Panduit smartzone G5 - User CLI Commands; Device CLI Commands

SMARTZONE UPS USER MANUAL
144
Command
Description
Example
daisy chain unit number: 1
daisy chain address list:
000
Daisy Mode: RNA
Panduit>dev daisy qna
SUCCESS
System Reboot now, Are
you sure? (Y/N): N
dev daisy <rna|qna> init
Initialize daisychain.
Panduit>dev daisy qna init
SUCESS
System Reboot now, Are
you sure? (Y/N):N
dev hid <PDUID> <hot |
cold> <lock | unlock>
Remote locking and
unlocking the cabinet.
PANDUIT>dev hid 1 cold
unlock
SUCCESS
dev outlet <PDUID> status Query all outlets' status
with specified PDUID.
Panduit>Dev outlet 1
status
SUCCESS
Relay Outlet Status
Outlet#1: Close Outlet#2:
Close Outlet#3: Close
Outlet#4: Close
Outlet#5: Close Outlet#6:
Close Outlet#7: Close
Outlet#8: Close
Outlet#9: Close Outlet#10:
Close Outlet#11: Close
Outlet#12: Close
NOTE 1: For M pdu, this
command is in valid.
NOTE 2: PDUID index
from 1; if in daisy chain,
the master's PDUID is 1,
others is ,2,3,
dev outlet <PDUID>
<outlet index> [on|off]
Query or set specified
PDUID and outlet-index's
outlet status.
Panduit> dev outlet 1 1 off
SUCCESS