ii
APEX615n Installation Guide
APEX615n CONTROLLER/DRIVE: LVD Installation Instructions
Product Type: APEX6151, APEX6152 and APEX6154 Servo Controller/Drives
The above products are in compliance with the requirements of directives
• 72/23/EEC Low Voltage Directive
• 93/68/EEC CE Marking Directive
APEX615n Controller/Drives, when installed according to the procedures in the main body of
this installation guide, may not necessarily comply with the Low Voltage Directive (LVD) of
the European Community. To install an APEX615n Controller/Drive so that it complies with
LVD, you must follow the additional procedures described in Appendix D, under LVD
Installation Instructions. If you do not follow these instructions, the protection of the product
may be impaired.
The APEX615n Series of Controller/Drives are sold as complex components to professional
assemblers. As components, they are not required to be compliant with Electromagnetic
Compatibility Directive 89/336/EEC. However, information is offered in Appendix E on how
to install these drives in a manner most likely to minimize the effects of controller and drive
emissions and to maximize the immunity of controllers and drives from externally generated
interference.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
