Parkside PMSG 200 A2 - English; Table of Contents

GB/IE/NI/CY/MT
5
z Table of pictograms used
Attention! Read the operating
instructions!
I
2
Rated value of the welding
current
1~ 50 Hz
Mains input; number of phases
and alternating current symbol
and rated value of the frequency
I
1 eff
Effective value of the greatest
mains current
U
0
Rated value of the no-load
voltage
Do not dispose of any electrical
devices in domestic waste!
U
1
Rated value of the mains
voltage
Never use the device in the open
air or when it’s raining!
U
2
Standardised operating
voltage
Electric shock from the welding
electrode can be fatal!
I
1 max
Greatest rated value of the
mains current
Table of pictograms used ........................................................................................Page 5
Introduction ..............................................................................................................Page 6
Intended use .............................................................................................................Page 6
Package contents .......................................................................................................Page 7
Parts description ........................................................................................................Page 8
Technical specifications ..............................................................................................Page 8
Safety instructions ..................................................................................................Page 9
Before using the device ...........................................................................................Page 17
Assembly ..................................................................................................................Page 17
Assembling the welding protection shield......................................................................Page 17
MIG welding .............................................................................................................Page 17
Adaptation of device to solid welding wire with inert gas ...............................................Page 18
Adaptation of device to flux-cored welding wire without inert gas ....................................Page 19
Inserting welding wire ................................................................................................Page 19
Using the device .......................................................................................................Page 20
Switching the device on and off ...................................................................................Page 20
Selecting the welding method ......................................................................................Page 20
Welding ...................................................................................................................Page 20
Creating a weld seam ................................................................................................Page 22
MMA welding ...........................................................................................................Page 24
TIG welding ..............................................................................................................Page 26
Maintenance and cleaning ......................................................................................Page 26
Information about recycling and disposal .............................................................Page 27
EC Declaration of Conformity ..................................................................................Page 27
Warranty and service information ......................................................................... Page 28
Warranty conditions...................................................................................................Page 28
Warranty period and statutory claims for defects ...........................................................Page 28
Extent of warranty ......................................................................................................Page 28
Processing of warranty claims .....................................................................................Page 29
Service.......................................................................................................................Page 29