6
GB/IE/NI/CY/MT
Inhalation of welding fumes can
endanger your health.
Caution!
Risk of electric shock!
Welding sparks can cause an
explosion or fire.
Important note!
Arc beams can damage your eyes
and injure your skin.
Dispose of the device and
packaging in an environmentally
friendly manner!
MV
Electromagnetic fields can disrupt
the function of cardiac pacemakers.
Risk of serious injury or death.
Attention: Potential hazards!
IP21S
Protection class
Earth terminal
Single-phase static frequency
converter-transformer-
commutator
H
Insulation class
Direct current
Made from recycled material.
Greatest rated value of the
welding time in intermittent
mode Σ
t
ON
Greatest rated value of the
welding time in continuous
mode t
ON (max)
Manual arc welding with
encased rod electrodes
Metal inert and active gas welding
including the use of flux-cored
wire
Tungsten inert gas welding
Multi-Process Welder PMSG 200 A2
z Introduction
Congratulations! You have purchased one of our high-quality devices. Please familiarise
yourself with the product before using it for the first time. To do so, please read through the
following operating and safety instructions carefully. This tool must be set up or used only
by people who have been trained to do so.
KEEP OUT OF THE REACH OF CHILDREN!
z Intended use
The device is designed for MIG welding (welding with welding wire and inert gas), MMA welding
(welding with rod electrodes) and TIG welding (tungsten inert gas welding). When using solid wires
To Next Page
Loading...
