Parrot ANAFI FPV - Page 77

ANAFI
User Guide v2.6 – published on August 30, 2019
77
Note that Arcade mode is compatible with:
- All piloting modes, including FPV
- All photo and video modes
- All flying settings
- Thermal mode
Joysticks
The joysticks are used differently from the Classic mode in that your drone will
advance, using the joysticks of the Parrot Skycontroller 3, in the direction shown by
the camera in immersed mode.
Joysticks: Arcade mode
Activating Arcade mode
There are two ways to enable Arcade mode:
- Via the flying modes on the HUD:
• Enter the HUD,
• Tap the “PILOTING MODE” box in the bottom bar of the HUD, and
• Select "Arcade"
- Via the Interface Settings
Exit Arcade mode
A marker appears in the HUD and shows when the flying mode returns to Classic
mode automatically:
- When an RTH is activated (manually or after disconnection),
- When your drone is landing,
- When the Skycontroller 3, the terminal or your drone is disconnected.
Elevation
Camera
orientation
Zoom
Forward/Backward
Left / Right