PCE Instruments PCE-3000ULS User Manual

46
Figure 2.39 - Enter the specific value of the calibration measure
After performing these steps, a calibration completion message will be displayed.
To exit the process of creating a new calibration, you need to press a button , on an
empty line of name or number, and a dialog box will appear (Fig. 2.40), where you
need to select "Yes" or "No" and press the button .
Figure 2.40 - Exit the calibration mode

PCE Instruments PCE-3000ULS Specifications

General

Brand	PCE Instruments
Model	PCE-3000ULS
Category	Test Equipment
Language	English