8.2. App for mobile phones
Download the app "PeakTech Safety Tester" for free from the App Store or install the apk-file from
the CD manually (Android only).
Open the application and start a Bluetooth data connection. Please ensure that on both devices, the
installation safety tester and your mobile phone, the Bluetooth interface is enabled and active.
In the application for mobile phones, the data can be transferred from the meter by pressing a
button in the measured value table and can be forwarded directly by e-mail.
All rights, also for translation, reprinting and copy of this manual or parts are reserved.
Reproduction of all kinds (photocopy, microfilm or other) only by written permission of the publisher.
This manual considers the latest technical knowing. Technical changing which are in the interest of progress
reserved.
We herewith confirm, that the units are calibrated by the factory according to the specifications as per the
technical specifications.
We recommend to calibrate the unit again, after 1 year.
© PeakTech
®
06/2018/MP/SM
PeakTech Prüf- und Messtechnik GmbH – Gerstenstieg 4 –
DE-22926 Ahrensburg / Germany
+49-(0) 4102-42343/44 +49-(0) 4102-434 16
info@peaktech.de www.peaktech.de
To Previous Page
Loading...
Need help?
General
