PeakTech 2755 User Manual

Number
Symbol
Value/Meaning
11
Bluetooth connection activated
12
Overheat warning
13
Display 30 seconds (time-delayed) RCDs
14
Measurement active
15
16
Primary display and measurement units.
17
18
Secondary display and measurement units.
19
Fault voltage. Measures neutral to earth.
20
Indicates the preset fault voltage limit.
21
Arrows above or below the terminal indicator symbol
indicate reversed polarity. Check the connection or the
wiring to correct it.
22
N-PE
N-PE Value (Neutral to Ground)
23
L-N
L-N Value (Phase to Neutral)
24
L-PE
L-PE Value(Phase to Ground)
25
PFC
Prospective Earth Fault Current
PSC
Calculated from voltage and loop impedance which is
measured
26
Measurement active
27
High Voltage Warning, Do not touch test leads or live
wires in system under test!
28
Warning. Read manual before use!
-63-

PeakTech 2755 Specifications

General

Brand	PeakTech
Model	2755
Category	Test Equipment
Language	English