Preface
Please read this operation manual before attempting to use the P350 flexitrax system. Note that this manual and all
its contents are subject to change. Pearpoint products are under continuous development.
Pearpoint reserves the right to modify any product, including this manual, without notice and some product changes
may have taken place after this user manual was published.
Contact your local Pearpoint dealer or visit www.pearpoint.com for the latest information about the P350 flexitrax
product family, including all accessories, documentation and software updates.
This operational manual is for use with MK3 systems with P350 Controller software versions 4.30 and above. New
functions were introduced with the MK3 systems, as well as new connectors between the controller, drum and PSU.
For earlier product compatibility information, contact your local Pearpoint representative.
Before you begin – Important legal & safety notices
Please observe all safety notices and warnings in this manual before operating the system
Warnings, Cautions and Notes
WARNING!: Warnings alert you to possible personal injury.
CAUTION: Cautions alert you to possible equipment damage.
NOTE: Notes contain useful information.
Key to symbols used
General Warning: Refer to Manual for specific instruction or advice.
Electrical Hazard: Observe safe practices and exercise extreme caution.
Heavy object: Additional care must be taken when lifting.
Biohazard: Disinfect after use. Wear appropriate personal protective equipment (PPE).
Hot Surface: Allow to cool or use appropriate protection when handling.
Crush hazard: Keep body parts away from this area
Risk of heat generation / fire
To Next Page
Loading...