P350 flexitrax Operation Manual 63
Section 6 - Reviewing your work
6.1 The Job Browser Window
When you have completed your survey, from the main display, press MENU > JOBS to review your jobs.
This menu screen is organized into three areas.
Job details: This shows the client, site and survey details
of the job selected in the jobs list.
Jobs list: This is the list, in order, of all the jobs stored in
your memory card. The letter “A” denotes that a job is
active.
Menu bar: Bottom of screen. This shows all the available
commands.
Use the Job Browser to review all the jobs present in your storage
device, see which job is active, create a new job, resume an
existing one and add a site or survey to an existing job.
1. Use the arrow keys, Page Up, Page Dn, Home and End
to browse the Jobs list. You can also navigate by keying
the job number.
2. Press OK or ► to review the selected job by entering the
Job Reviewer screen.
There are three commands available which will all take you to the Job Reviewer screen to perform a different function:
NEW: Create a new job.
+SITE: Add a site to the selected job (client).
+SURV: Add a survey to the selected job (site).
6.2 The Job Reviewer Window
The Job Reviewer window, is the menu that allows
creating, editing or reviewing a job client, site and survey
data. It also allows reviewing quickly all the files associated
with the selected job.
The Job Reviewer screen is divided into 3 areas:
Job details: This shows client, site and survey
details.
File browser: This shows all the files associated
with the job.
Menu bar: This shows all the available
commands.
NOTE: The available commands in the menu bar will
change depending if you are reviewing Job’s details or if
you are in the file browser area.
The filenames can be set to be recorded using either the
date, survey, site or client information. See the Controller Settings section.
To Next Page
Loading...