P350 Operation Manual 80
9.3 Care, cleaning and maintenance
WARNING! Clean and sanitize the P350 flexitrax system with a suitable disinfectant at regular intervals to help prevent
the risk of biological contamination from foul water sources. Use appropriate gloves when cleaning the system.
Do not dismantle component parts, unless directed by this manual.
Terminals
CAUTION! Do not use damaged, dirty or corroded components, including all terminal connections, cables and
O-rings. Do not grease, dampen or lubricate any connectors, as this will generally ‘clog up’ the spring pogo connectors
and pads and is likely to cause electrical issues. Ensure that all terminals and connection points are clean and free of
corrosion and debris before you attempt to use this equipment. Check that any O-rings are clean, greased and
undamaged. Use a silicon-based grease such as "Super Lube" to lubricate o-rings. Pearpoint recommends protecting
all terminals with plastic protection caps when the system is not in use. Only assemble or disassemble system
components in a dry and clean environment.
CAUTION: On downhole equipment, a modified screw is used to ensure waterproof connections. It is critically
important that only our official screws are used, our C-clamp screws are modified to ensure waterproof and reliable
connection. Significant damage and costs will occur if "off-the-shelf" screws are used – which will not be covered by
our warranty.
Cleaning the system
WARNING! Foul water systems can be a source of biological hazards; ensure you clean all equipment with a suitable
disinfectant after use.
CAUTION: Do not use high-pressure hoses to clean this system. This could damage it.
Command Module
• Clean the case with mild soapy water.
• Use lint-free cloth to clean the LCD screen.
• The front I/O socket panel has a rain-proof water sealing flap. Make sure this is closed (protecting the I/O sockets)
before allowing water anywhere near this area.
Crawler and Camera
Clean with water and disinfectant
Clean the lens with a lint-free cloth
Cable and drum
Use a cloth moistened with disinfectant
Storing the system
The P350 is a precision tool. Always store the system, including all components and accessories, in a clean and dry
environment.
To Next Page
Loading...