P350 flexitrax Operation Manual 23
Entering text with the keypad
If required, you can enter text with the keypad arrows, although the keyboard is far more convenient.
1. Use the ▲ or ▼ arrows to cycle through the list of available characters.
2. Use the ◄ or ► and arrows to move the cursor backwards and forwards along the line.
3. To toggle between upper and lower case press CAPS.
4. To delete all text to left of the cursor, select DEL<.
5. To delete all text to the right of the cursor, select DEL>.
6. Press CANCL to undo your changes and exit.
7. Press OK to save your changes
Menu layout and feature map
Figure 3.5 Menu feature map
File Browser Window. View and edit files.
Time, date, date format, language, imperial or
metric, color scheme, menu time-out, video
source, Job prompt, pitch units and font size.
Bluetooth and Ethernet / network settings
Change file name structure, Video title setup and
Video quality.
Select Drum size, Reel type and cable length.
Affects accurate counter measurement and video
quality.
To manually adjust the Video Equalizer, use this
feature to search for more suitable settings.
Select the correct wheel size used, inaccurate
counter measurement will occur if set incorrectly.
Adjust camera white balance
Select PIPE or SURFACE mode.
Set Display size (some monitors use different
ratios, similar to widescreen or 4:3)
Enable / disable on-screen time text
Enable / disable on-screen date text
Enable / disable on-screen Pitch text
Enable / disable on-screen Mimic text
To Next Page
Loading...