P350 Operation Manual 68
To playback a video:
Select the file you wish to playback. Press video ► or OK to start the playback.
Press to pause the video at any time.
Press ◄ and ► and to fast-forward or rewind. To resume normal playback speed press video ►.
Press VOL- and VOL+ to adjust the audio volume.
Press │<< or >>│ to jump to the previous or next photo or observation marker.
Press ■ or OK to stop the playback and go back to the file browser.
NOTE: With ‘Tab Menu Timeout’ enabled, the Playback OSD will fade from view after a few seconds.
The digital imaging controls of the Controller also work when playing video. Zoom, rotate or pan the picture on screen.
CAUTION! Do not remove the memory storage device, or switch the controller off during the playback process.
Doing so may corrupt all data on the storage device and cause the controller to crash.
Screen captures
During playback it is possible to capture video frames as JPEG photos.
NOTE: You can view folders created by the P350 flexitrax in Windows Explorer or the Mac OS X Finder when you
connect the command module to your computer via USB connection (see Section 6.6 for information on USB
connections). The P350 card browser will only display compatible files: JPEG, MP4, TXT, BIN and HTML. BIN and
HTML files are listed only and cannot be viewed on the command module.
TXT files can only be viewed if smaller than 1Mbyte.
Viewing Pitch Log
The file browser allows you to view pitch log files created by the P350 system.
NOTE: Pitch log TXT files can only be viewed if smaller than 1Mbyte. Larger files will have to be opened using a PC.
To view a pitch log file:
1. Select a TXT file using the ▲ and ▼ arrows.
2. Press OK or Enter to display the log file on-screen.
3. Press ▲ or ▼ or Page Up or Page Down to scroll through the data.
4. Press OK to close the file.
To Next Page
Loading...