Installer Manual Fleck 5800 - XTR - Maintenance
102 / 122 Ref. MKT-IM-006 / B - 16.01.2018
9.2.7. Cleaning the BLFC
No. Operation
A Remove the BLFC holder (1).
B Using pliers, remove the grid (4) from BLFC holder (1).
C Remove the BLFC (3) from the grid (4).
D Clean or change the BLFC (3) and the seal (2).
E Lubricate the seal with approved silicone lubricant only.
F Reverse above procedure steps to rebuild.
To Next Page
Loading...
