Installer Manual Fleck 5800 - XTR - Programming
88 / 122 Ref. MKT-IM-006 / B - 16.01.2018
6.5.1. Error log
Error log screen shows the list of logging attempts with date and time. From the diagnostics screen
press to display the error log screen.
To clear all error logs, press to activate the button, press again to clear the list. Then enter 1201
at the password prompt screen and press to validate.
6.6. Resetting the controller
From the master settings screen press to display the reset screen.
Press the factory button to reset all controller parameters to their factory defaults, or press the non-
factory button to reset controller parameters to previously saved custom settings (see 6.4.10. Non-
factory setting, page 86).
A warning screen appears before parameters are reset. Press to confirm the reset or press to
return to master settings.
Error Log
# date time
error log empty
To Next Page
Loading...
