Installer Manual Fleck 5800 - XTR - Programming
54 / 122 Ref. MKT-IM-006 / B - 16.01.2018
Press the hardness units button and use the arrows to adjust the system's hardness units of
measure (grains per gallon, mg/L or ppm, German degrees, French degrees, or English degrees).
Hardness units are adjustable only if metric units are selected.
Press to validate the selection and move to the assistance name screen.
6.2.2. Assistance name screen
Using the keypad, type the name of the water treatment professional or company that the homeowner
may call for system service (optional).
To enter a letter using the keypad, quickly press the keypad button the number of times that
correspond with the position of the correct letter on the button. For example, to enter the letter "c",
quickly press the abc button three times.
Press to validate the selection and move to the assistance phone screen.
6.2.3. Assistance phone screen
Enter the phone number of the water treatment professional or company that the homeowner may
call for system service (optional).
Press to validate the selection and move to the assistance interval screen.
Assistance/Mainten. Name
abc def ghi jkl mno pqr
stu vwx yz
Assistance/Mainten. Phone
123456
7890
To Next Page
Loading...
